Canon IMAGECLASS LBP654CDW - Importing;Exporting the Setting Data

Importing/Exporting the Setting Data
1648-096
Machine settings data can be saved in your computer (export). Data that is saved on your computer can also be
registered in the machine (import). Data exported from this machine can be imported to another machine of the
same model. So you can easily copy a variety of settings data to multiple machines. To use these features, it is
required that you have logged in to System Manager Mode.
Exporting the Setting Data(P. 286)
Importing the Setting Data(P. 287)
Do not turn OFF the machine until the import or export process is complete
● It may take a few minutes to complete the process. If the machine is turned OFF during the process, it may
result in damage to data or the machine.
Do not operate the machine during the import or export process
● Before importing/exporting, check that no operation such as printing documents is currently processing.
● For the settings that cannot be imported/exported, see Setting Menu List(P. 295) .
● You can also import/export settings data via a USB memory device by using the operation panel of the
machine.
<Import/Export>(P. 416)
● For more information about the basic operations to be performed when setting the machine from the
Remote UI, see Setting Up Menu Options from Remote UI(P. 283) .
Exporting the Setting Data
You can export machine settings data, and save them on a computer. It is recommended that you regularly back up
important settings.
1
Start the Remote UI and log in to System Manager Mode. Starting Remote
UI(P. 275)
2
Click [Settings/Registration] on the Portal page. Remote UI Screen(P. 276)
3
Select [Data Management] [Export].
4
Specify the encryption password.
Managing the Machine
286