Canon IMAGECLASS LBP654CDW - Machine Maintenance Procedures

<On>
Touch panel model
<Menu> <Management Settings> <License/Other> <Remote UI Settings> <Remote UI
Settings> Select <On> in <Use Remote UI> Select <Off> or <On> in <Use
TLS> <Apply> Restart the machine
Black and white LCD model
<Menu> <Management Settings> <Remote UI Settings/Update Firmware> <Remote UI
Settings> <Use Remote UI> <On> Select <Off> or <On> Restart the machine
<Restrict Access>/<Remote UI Access Security Settings>
Specify so that entry of a PIN is required for access to the Remote UI. Set a PIN of up to 7 digits. All users use a
common PIN. Setting a Remote UI PIN(P. 232)
<Off>
<On>
<Remote UI Access PIN>
<Menu> <Management Settings> <License/Other>/<Remote UI Settings/Update Firmware>
<Remote UI Settings> <Restrict Access>/<Remote UI Access Security Settings> <On> Enter
a PIN <Apply> Enter the PIN (Conrm) <Apply>
<Update Firmware>
*1
Select how to install the rmware update according to the environment of the machine.
Updating the
Firmware(P. 289)
<Via PC>
<Via Internet>
<Version Information>
Setting Menu List
415