Canon IMAGECLASS LBP654CDW - Setting a Wait Time for Connecting to a Network

Setting a Wait Time for Connecting to a Network
1648-017
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to dene the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Select <Menu> in the Home screen. Home Screen(P. 107)
2
Select <Preferences> <Network>.
● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 123)
3
Select <Waiting Time for Connection at Startup>.
4
Enter the waiting time required to start a communication with the network, and
press <Apply> ( ).
LINKS
Conguring Ethernet Settings(P. 61)
Changing the Maximum Transmission Unit(P. 63)
Setting Up
64