Canon IMAGECLASS LBP654CDW - Changing Port Numbers

Changing Port Numbers
1648-082
Ports serve as endpoints for communicating with other devices. Typically, conventional port numbers are used for
major protocols, but devices that use these port numbers are vulnerable to attacks because these port numbers are
well-known. To enhance security, your Network Administrator may change the port numbers. When a port number has
been changed, the new number must be shared with the communicating devices, such as computers and servers.
Specify the port number settings depending on the network environment.
● To change the port number for proxy server, see Setting a Proxy(P. 244) .
1
Select <Menu> in the Home screen. Home Screen(P. 107)
2
Select <Preferences> <Network>.
● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 123)
3
Select <TCP/IP Settings> <Port Number Settings>.
4
Selecting the protocol of which you want to change the port number.
Learning more about the protocols
● <LPD>/<RAW>/<WSD Multicast Discovery> Conguring Printing Protocols and WSD Functions(P. 51)
● <HTTP> Disabling HTTP Communication(P. 272)
● <POP3> Receiving I-Faxes for Printing(P. 194)
● <SNMP>
Monitoring and Controlling the Machine with SNMP(P. 73)
● <Multicast Discovery> Monitoring the Machine from the Device Management Systems(P. 78)
5
Enter the port number, and press <Apply> ( ).
6
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
LINKS
Conguring Printer Ports(P. 54)
Managing the Machine
243