Canon IMAGECLASS LBP654CDW - Page 253

7
Click [Edit].
8
Select the [Use TLS] check box and click [OK].
9
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Using the operation panel
● You can also enable or disable TLS encrypted communication from <Menu> in the Home screen.
<Remote
UI Settings>/<Use Remote UI>(P. 414)
Starting the Remote UI with TLS
● If you try to start the Remote UI when TLS is enabled, a security alert may be displayed regarding the
security certicate. In this case, check that the correct URL is entered in the address eld, and then proceed
to display the Remote UI screen. Starting Remote UI(P. 275)
Using TLS to encrypt I-Fax reception
● If the POP3 server supports TLS, you can enable TLS for communication with the POP3 server (
Conguring the I-Fax RX Settings(P. 194) ). For more information about the POP3 server, contact your
Internet service provider or Network Administrator.
Limiting the TLS version
● Select [Allowed Versions] on the [TLS Settings] page of Remote UI, and specify the upper limit and lower
limit.
LINKS
Generating the Key and Certicate for Network Communication(P. 249)
Generating a Key and Certicate Signing Request (CSR)(P. 252)
Registering the Key and Certicate for Network Communication(P. 255)
Managing the Machine
247