<Print Side Priority>
To print on a specic side of paper, you do not need to ip over paper in the paper source whether 1- or 2-
sided printing is selected.
● If <Print Side Priority> is set for a paper source that is loaded with paper you cannot use for 2-sided printing
( Available Paper(P. 521) ), <Speed Priority> is applied to the paper source instead. In this case, you need
to load the paper in the same way as when <Speed Priority> is selected ( Loading Preprinted
Paper(P. 142) ).
● 1-sided printing speed may be slower when <Print Side Priority> is selected.
Setting Menu List
350
To Next Page
Loading...
