Setting Up Connection by Specifying Detailed Settings(P. 36)
● Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Use Remote UI to set the information necessary for authentication./Use
Remote UI to set info. necessary for authentication.
The IEEE 802.1X settings are incorrect.
● Check whether [Login Name] is set correctly.
● Check whether the [Use TLS], [Use TTLS], or [Use PEAP] check box is selected.
● If using TLS, check whether a "key and certicate" is registered.
● If using TTLS or PEAP, check whether a user name and password are set correctly.
Conguring IEEE 802.1X Authentication Settings(P. 264)
Yellow cartridge has reached end of life.
The toner cartridge has reached the end of its lifetime.
● Replacement of the toner cartridge is recommended.
Procedure for Replacing the Toner Cartridge(P. 428)
Troubleshooting
490
To Next Page
