Handling sheets
Handling sheets
Selecting the Cassette as the Paper Source
Y ou can switch between manual and auto paper feed methods by pressing the Feeder Selection button.
The Auto Feed lamp is lit when paper is supplied automatically , and the Paper T ray lamp is lit when paper is
supplied manually .
Y ou must specify the auto paper feed method when using paper from the Cassette . Press the Feeder
Selection button to activate the Auto Feed lamp (a).
Note
• Y ou cannot switch the paper source in the following situations:
• If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary . ( → P .696)
• If the Data lamp is ashing
Select the paper source after printing is nished.
• If a printer menu operation is in progress
Select the paper source after the operation is nished.
160 Handling Paper
To Next Page
Loading...
