Messages regarding paper
Insufcient paper for job
Cause Corrective Action
Follow the steps below to replace the roll.
1. Remove the roll.
( → P .128)
( → P .123)
2. Load a roll with enough paper left.
( → P .121)
( → P .124)
3. If no barcode was printed on the roll, specify the
paper type.
( → P .130)
4. Specify the paper length, unless a barcode has
been printed on the roll and you have deactivated
the automatic detection function of the remaining
roll paper .
( → P .131)
Hold down the Stop button for a second or more to
cancel printing.
The printer has received a print job longer than the
amount of roll paper left.
Press the Online button to resume printing.
However , the roll paper may run out during the
print job and you may not be able to print all of the
document.
Media T ype not compatible with cassette.
Cause Corrective Action
The printer has received a print job specifying the
Cassette as the media source, but this paper is not
compatible with the Cassette.
1. Make sure you are using the correct printer driver
for the printer .
2. Load paper compatible with the Cassette , change
the printer driver settings to match it, and try
printing again. For details on supported paper ,
refer to the Paper Reference Guide . ( → P .1 12)
No cassette loaded
Cause Corrective Action
The Cassette is not fully inserted. Remove the Cassette and reinsert the Cassette
rmly , all the way .
702 Error Message
To Next Page
Loading...
Need help?
General
Weight and Dimensions
