Cleaning the Printer
Cleaning the Printer
Cleaning the Printer Exterior
Clean the printer regularly to maintain better printing quality and help prevent problems.
About once a month, clean the printer exterior .
1. T urn the printer of f. ( → P .19)
2. Unplug the power cord from the outlet.
Caution
• Always turn of f the printer and unplug the power cord before cleaning or maintenance. Accidentally
leaving the printer on poses a risk of injury if you touch moving parts inside the printer .
3. Using a damp cloth that you have wrung out completely , wipe the exterior surfaces of the printer .
Dry the surfaces with a dry cloth.
Caution
• Never use ammable solvents such as alcohol, benzene, or thinner . If these substances come into
contact with electrical components inside the printer , there is a risk of re or electrical shock.
Important
• If the Output T ray is dirty , it may soil the edge of the paper when the paper is cut. W e recommend
cleaning the Output T ray even if it does not appear dirty , because it may actually be covered with
paper dust.
642 Maintenance
To Next Page
Loading...
