Name: Canon imagePROGRAF iPF610
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Adjusting the feed amount

Adjusting the Feed Amount Manually

If printed images are af fected by banding in dif ferent colors, adjust the amount that paper is fed.

This topic describes how to adjust the feed amount manually .

When using highly transparent media for which automatic adjustment is not supported, adjust the feed amount

manually . W e recommend automatic adjustment for other types of media. For instructions on automatic

adjustment, see “Adjusting the Feed Amount Automatically”. (→P .604)

Note

• T o adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed

at exactly the right length, for example), specify the amount of paper stretching or shrinkage when

adjusting the feed amount. ( → P .61 1)

Important

• Use paper of the same type and size for adjustment as you will use for printing.

• T o apply the results of adjusting the feed amount in printing, you must rst set Feed Priority to Band

Joint . Note that if you select Automatic , the results of adjustment will only be applied in printing if you

set Print Priority in the printer driver to Image or Ofce Document . ( → P .203)

Follow these steps to change the Feed Priority setting.

1. Press the Menu button to display MAIN MENU .

2. Press ▲ or ▼ to select Paper Details , and then press the ► button.

3. Press ▲ or ▼ to select the type of paper , and then press the ► button.

4. Press ▲ or ▼ to select Feed Priority , and then press the ► button.

5. Press ▲ or ▼ to select Band Joint , and then press the OK button.

Follow the steps below to adjust the feed amount manually .

1. When using sheets, have two unused sheets A4/Letter-sized or larger ready .

When using a roll, load a roll 10 inches (254 mm) or wider .

• Loading Roll on the Roll Holder (→P .121)

• Loading Rolls in the Roll Feed Unit (→P .124)

• Loading Sheets in the Cassette (→P .162)

• Loading Sheets Manually (→P .165)

Note

• Always make sure the loaded paper matches the media type setting. Adjustment cannot be

completed correctly unless the setting value matches the loaded paper .

Maintenance 607

Other manuals for Canon imagePROGRAF iPF610

Questions and Answers:

Need help?

Do you have a question about the Canon imagePROGRAF iPF610 and is the answer not in the manual?

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Magenta, Pigment cyan, Pigment magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Media thickness	1.5 mm
Maximum print size	610 x 1897 mm
Maximum roll length	18 m
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A1, A2, A3
ISO B-series sizes (B0...B9)	B2, B4
Maximum printable area	203 mm
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Compatible ink types, supplies	PFI-101 (130ml, C, M, Y, PC, PM, R, G, B), PFI-103 (130ml, BK, MBK, GY, PGY)
Display	LCD
Sound power level (standby)	35 dB
Sound pressure level (printing)	49 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10base-T; 100base-TX Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPX/SPX (Netware 3.2(J), 4.1 (J), 4.11(J), 4.2(J), 5.0(J), 5.1(J) SNMP (Canon-MIB), HTTP, TCP/IP, AppleTalk
Package weight	77000 g
Bundled software	imagePROGRAF Printer Driver 2007 (Win/Mac), imagePROGRAF Status Monitor Media Configuration Tool Print Plug-in f/ Photoshop Print Plug-in f/ Digital Photo Pro Digital Photo Front-Access
Power consumption (standby)	6 W
Power consumption (typical)	100 W
Power consumption (PowerSave)	1 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Compatible operating systems	Windows 2000, XP, Vista 32 bit/64 bit Macintosh OS 9, OS 10, Leopard
Sustainability certificates	ENERGY STAR