Canon imagePROGRAF iPF610 - Output Stacker Precautions

Output Stacker
Output Stacker Precautions
When you print on rolls, you can use the Output Stacker to hold ejected printouts.
When you use the Output Stacker , push down Basket Rod #1 (b) fully toward the front, keeping it even on the
left and right so that Basket Rod #2 (a) is not slanted.
The Output Stacker can accommodate one sheet. Remove each sheet before printing if you are printing
a series of documents.
When using the output stacker , push in the output tray extension. Printed documents are not stored in
the output stacker .
Handling Paper 201