HP-GL/2 problems
Replotting with HP-GL/2 jobs is not possible.
Cause Corrective Action
The data was lost because of replotting. Data for replotting is lost after the following
operations. In this case, send the print job again.
• The memory buf fer was cleared from the Control
Panel .
• The printer was turned of f.
• The printer has received a new HP-GL/2 print job.
• Printing has been canceled
Printed Colors in Line Drawings are Inaccurate During
HP-GL/2 Printing
Cause Corrective Action
AdjustFaintLines in the main menu is set to On . Selecting Off may help produce the expected results.
However , lines in some colors may appear broken.
690 T roubleshooting
To Next Page
Loading...
