Responding to Messages
Error Messages
W arning messages
W arning messages are shown on lines 2-4 of the Display Screen .
Although warning messages do not prevent printer operation, you should check the message and take
the appropriate action.
• GARO Wxxxx (x represents a number) (→P .718)
• GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) (→P .717)
• GL2: W0502 The parameter is out of range. (→P .717)
• GL2: W0504 This command is not supported. (→P .717)
• Ink Level: Check (→P .710)
• End of paper feed. (→P .707)
• This type of paper is not compatible with HP-GL/2. (→P .717)
• Prepare for parts replacement. (→P .718)
• Parts replacement time has passed. (→P .719)
• Problem with Printhead (→P .715)
• Prepare for maint cart replacement. (→P .716)
• Paper Mismatch (→P .700)
• Papr Size Mismatch (→P .701)
• Papr T ype Mismatch (→P .700)
Error messages (if action can be taken)
Check the message and take the appropriate action.
• Ink tank is empty . (→P .712)
• Ink insufcient. (→P .71 1)
• No ink tank loaded. (→P .710)
• Ink tank error . (→P .712)
• T op cover is open. (→P .718)
• Sheet printing is selected. (→P .703)
• Media T ype not compatible with cassette. (→P .702)
• No cassette loaded (→P .702)
• Cannot feed paper . (→P .704)
• Insufcient paper for job (→P .702)
• This type of paper is not compatible with HP-GL/2. (→P .717)
• Use another paper . (→P .713)
• This paper cannot be used. (→P .701)
• Cannot print as specied. (→P .713)
• Manual printing is selected, but a roll is loaded. (→P .704)
• W rong paper feed slot for this paper type. (→P .703)
• Cannot adjust band. (→P .713)
• Unknown le. (→P .718)
• Borderless printng not possible. (→P .705)
• Printhead error (→P .715)
• PHead needs cleaning. (→P .714)
• Cannot adjust printhead. (→P .713)
• Multi-sensor error (→P .719)
• Maintenance cartridge problem. (→P .716)
• Maintenance cartridge full. (→P .716)
698 Error Message
To Next Page
Loading...
