Canon imagePROGRAF iPF610 - Roll Printing Is Selected; Sheet Printing Is Selected; Roll Printing Is Selected, but Sheets Are Loaded

Messages regarding paper
Roll printing is selected, but sheets are loaded.
Cause Corrective Action
Press the OK button and remove the sheet.
( → P .176)
Load a roll and try printing again.
( → P .82)
A print job for rolls was received when a sheet is
loaded.
Hold down the Stop button for a second or more to
cancel printing.
Roll printing is selected.
Cause Corrective Action
Load a roll and try printing again.Y ou have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.
T o print on a sheet instead, hold the Stop button for
more than a second to cancel printing, load a sheet,
and then print. ( → P .89)
Sheet printing is selected.
Cause Corrective Action
Load a sheet and try printing again.Y ou have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
T o print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print. ( → P .82)
W rong paper feed slot for this paper type.
Cause Corrective Action
The Paper Feed Slot where paper is loaded does not
match the Paper Feed Slot specied as the paper
source.
T ry printing again after changing the settings in the
printer driver so that the Paper Feed Slot where paper
is loaded matches the Paper Feed Slot specied as
the paper source. ( → P .89)
Error Message 703