Name: Canon imagePROGRAF iPF610
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Handling sheets for paper feed slots

Loading heavyweight paper in the Front Paper Feed Slot

Important

• Before loading heavyweight paper , change the media type setting to POP Board . When POP Board is

selected as the type of paper , Front Paper Feed Slot is automatically selected.

Note

• Y ou can load only one sheet of paper at a time.

• Store unused paper in the original package, away from high temperature, humidity , and direct sunlight.

• If the paper is warped, straighten it before loading it.

• Load the paper straight. Loading paper askew will cause an error .

• After loading the paper , you cannot move it laterally to reposition it. Be sure to load the paper straight.

1. If you send a print job specifying POP Board from a computer beforehand, the type and size of

paper are shown on the Display Screen .Press the Load/Eject button.

Note

• If you will load heavyweight paper before sending a print job, press the Load/Eject button. After a

menu for selection of the type of paper is shown on the Display Screen , press ▲ or ▼ to select POP

Board , and then press the OK button. Next, a menu for selection of the paper size is shown on the

Display Screen . Press ▲ or ▼ to select the size of paper , and then press the OK button.

• For details on types of paper , see the Paper Reference Guide . ( → P .1 12)

• Be sure to select the correct paper type. If this setting does not match the type of paper loaded, it

may cause feed errors and af fect the printing quality .

2. After Leave 70cm/28" space behind printer and press OK. is displayed, check the space

behind the printer and press the OK button.

Note

• Suf cient space behind the printer is required when loading paper in the Front Paper Feed Slot . For

details on the space required for installation, see “Specications”. (→P .74)

3. Push the knob (a) of the V ertical Paper Guides back to lift the V ertical Paper Guides .

Handling Paper 189

Other manuals for Canon imagePROGRAF iPF610

Questions and Answers:

Need help?

Do you have a question about the Canon imagePROGRAF iPF610 and is the answer not in the manual?

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Magenta, Pigment cyan, Pigment magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Media thickness	1.5 mm
Maximum print size	610 x 1897 mm
Maximum roll length	18 m
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A1, A2, A3
ISO B-series sizes (B0...B9)	B2, B4
Maximum printable area	203 mm
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Compatible ink types, supplies	PFI-101 (130ml, C, M, Y, PC, PM, R, G, B), PFI-103 (130ml, BK, MBK, GY, PGY)
Display	LCD
Sound power level (standby)	35 dB
Sound pressure level (printing)	49 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10base-T; 100base-TX Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPX/SPX (Netware 3.2(J), 4.1 (J), 4.11(J), 4.2(J), 5.0(J), 5.1(J) SNMP (Canon-MIB), HTTP, TCP/IP, AppleTalk
Package weight	77000 g
Bundled software	imagePROGRAF Printer Driver 2007 (Win/Mac), imagePROGRAF Status Monitor Media Configuration Tool Print Plug-in f/ Photoshop Print Plug-in f/ Digital Photo Pro Digital Photo Front-Access
Power consumption (standby)	6 W
Power consumption (typical)	100 W
Power consumption (PowerSave)	1 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Compatible operating systems	Windows 2000, XP, Vista 32 bit/64 bit Macintosh OS 9, OS 10, Leopard
Sustainability certificates	ENERGY STAR