Printing enlargements or reductions
Reducing Originals that Exceed the Maximum Supported
Size for the Cassette (W indows)
This topic describes how to reduce originals that exceed the maximum supported size for the cassette before
printing, based on the following example.
• Document: CAD drawing
• Page size: A1 (594.0 × 8410.0 mm [23.4 × 33.1 in])
• Paper: Sheets ( Cassette )
• Paper type: Plain Paper
• Paper size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
1. Choose Print in the application menu.
2. Select the printer in the dialog box, and then open the printer driver dialog box. ( → P .494)
3. Make sure the Main sheet is displayed.
4. In the A Media T ype list, select the type of paper that is loaded. In this case, click Plain Paper .
5. After conrming that D Easy Settings is selected, click CAD (Line Drawing) or CAD
(Monochrome Line Drawing ) in the E Print T arget list.
Note
• Y ou can check the settings values selected in the E Print T arget list by clicking F V iew Settings .
Enhanced Printing Options 281
To Next Page
Loading...
