Printing banners or at other non-standard sizes
4. Make sure the Main sheet is displayed.
5. In the A Media T ype list, select the type of paper that is loaded. In this case, click Plain Paper .
6. After conrming that D Easy Settings is selected, click Scanned Image in the E Print T arget
list.
7. Click the Page Setup tab to display the Page Setup sheet.
8. Click O Size Options to display the Media Size Options dialog box.
9. Complete the following settings in the Media Size Options dialog box.
1. Enter a desired paper name in Custom Media Size Name . “430 mm Square” is used in this example.
2. Select mm or inch in Units .
3. Enter “430” [16.9 in] in both W idth and Height .
Note
• If you select the Fix the Ratio of the W idth to Height check box, after you enter a value in either
W idth or Height , the other value will be automatically applied based on the original aspect ratio.
364 Enhanced Printing Options
To Next Page
Loading...
