Adjusting the feed amount
6. Examine test pattern C1 for adjustment. After you determine the pattern in which streaks are
least noticeable, press the ▲ or ▼ to choose the pattern number , and then press the OK button.
C2 is displayed on the Control Panel .
7. Examine test pattern C2 for adjustment. After you determine the pattern in which streaks are
least noticeable, press the ▲ or ▼ to choose the pattern number , and then press the OK button.
The printer now goes back online.
Note
• If streaks seem least noticeable in two patterns but you cannot decide which one is better , choose an
intermediate value. For example, choose 1 1 if you cannot decide whether pattern 10 or 12 is better .
614 Maintenance
To Next Page
Loading...
