30
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
7
Load the print media.
When using a tube or plate, refer to
"Loading a Tube or Plate (P.21)"
.
When using a media cassette, refer to
"Loading a Label Tape Cassette (P.25)"
.
IMPORTANT
• When the print media feed is reversed, the ribbon in the ribbon cassette may become slack. If the
ribbon is slack, remove the ribbon cassette and remove the slack in the ribbon.
(P.19)
• For soft tubes, using the [Remove] key to feed backwards may damage the tube. In such cases, follow
the procedure described in
"For Thin Tubes (ø1.5 mm) (P.27)"
.
To Next Page
Loading...
