88
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
■
Fine-tuning the Cut Length ( Length Adjust)
[Example]
When printing on a tube with a cut length of "30 mm," the tube is printed shorter
than the setting, so the cut length is increased by 2 mm.
ABCD
The cut length is increased by 2mm.
1
Press the [Adjust] key.
2
Use [ ] or [ ] to select "Length," and press the [Enter] key.
$GMXVWPHQWV
Top position
VerticalPosition
Length
ɻ
3
Use [ ] or [ ] to select "Tube," and press the [Enter] key.
Length adjust
ShrinkTube
Label
Tube
0. 0ᶳ
0. 0ᶳ
0. 0ᶳ
4
Use [ ] to enter "+2.0mm" and press the [Enter] key.
Use [ ] (negative direction) or [ ] (plus
direction) to enter the adjust value. You can also
input using [+]/[-] keys or numeric keys.
You can adjust the range from -7.5 mm to 7.5
mm in 0.1 mm incr
ements.
ɻɻ
ᶳ
Length adjust
5
Press the [Shift]+[Canc] keys.
The display returns to the character input display.
IMPORTANT
• No further adjust in the negative direction will be applied when there is no more space for adjust (other
than characters) or when the minimum cut length or less is reached. For the minimum cut length of
To Next Page
Loading...
