Canon MK5000 - Page 91

87
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
■
Fine-tuning the Print Position in the Vertical Direction ( Vertical
Adjust)
[Example] When printing on a tube (ø6.0 mm), the print position is shifted upward, so move
the print position downward by 0.5 mm.
ABCD
ABCD
Move the print position
downward by 0.5 mm.
1
Press the [Adjust] key.
2
Use [ ] or [ ] to select "VerticalPosition," and press the [Enter] key.
$GMXVWPHQWV
Top position
VerticalPosition
Length
ɻ
3
Use [ ] or [ ] to select "Tube," and press the [Enter] key.
Vertical adjust
ShrinkTube
Label
Tube
4
Use [ ] or [ ] to select "ø6.0 mm" and press the [Enter] key.
Tube size
Љ5. 0ᶳ
Љ6. 0ᶳ
Љ6. 5ᶳ
Normal
Normal
Normal
5
Use [ ] to display "Down 0.5 mm" and press the [Enter] key.
󱾀
Use [ ] (upward)/[ ] (downward) to enter
the adjust value.
󱾀
You can adjust the range from 1.0 mm upward
t
o 1.0 mm downward in 0.1 mm increments.
Vertical adjust
ɻɻ
[ɻ Down 0. 5ᶳ]
6
Press the [Shift]+[Canc] keys.
󱾀
The display returns to the character input display.