Model 201 Installation & Technical
8400-M117-O1 Rev D
gate2= (Gateway Address, Second Part)
The format for the gateway address is: # . # . # . # (e.g., 0.0.0.0).
This parameter is the second part of the address.
Press the F3/ key to view the current setting for the second
part of the IP address. If the displayed setting is acceptable,
press the F3/ key to save it. Otherwise, use the F2/ and
F1/ keys to enter a new setting and press the F3/ key to
save the new setting. Allowable values are: 000 through 255.
gate3= (Gateway Address, Third Part)
The format for the gateway address is: # . # . # . # (e.g., 0.0.0.0).
This parameter is the third part of the address.
Press the F3/ key to view the current setting for the third part
of the IP address. If the displayed setting is acceptable, press
the F3/ key to save it. Otherwise, use the F2/ and F1/
keys to enter a new setting and press the F3/ key to save the
new setting. Allowable values are: 000 through 255.
gate4= (Gateway Address, Fourth Part)
The format for the gateway address is: # . # . # . # (e.g., 0.0.0.0).
This parameter is the fourth part of the address.
Press the F3/ key to view the current setting for the fourth part
of the IP address. If the displayed setting is acceptable, press
the F3/ key to save it. Otherwise, use the F2/ and F1/
keys to enter a new setting and press the F3/ key to save the
new setting. Allowable values are: 000 through 255.
dns1 (Domain Name Server, First Part)
The format for the Domain Name Server is: ## . # . # . #
(e.g., 90.1.2.8). This parameter is the first part of the Domain
Name Server.
Press the F3/ key to view the current setting for the first part of
the Netmask. If the displayed setting is acceptable, press the
F3/ key to save it. Otherwise, use the F2/ and F1/ keys to
enter a new setting and press the F3/ key to save the new
setting. Allowable values are: 000 through 255.
To Next Page
Loading...
Need help?
General