8545-M838-O1 Rev D 825 Installation & Technical
SETUP AND CALIBRATION, CONT.
Telnet:
With the Setup Network screen displayed the current setting for the Telnet: parameter
will be shown. If the setting displayed is acceptable, press the ENTER key or the
Navigation Keys Left Arrow to return to the previous screen.
Otherwise, press the SPACE key to toggle its status (select YES or NO) and then press
the ENTER key to save the new setting and return to the previous screen.
Telnet is Enabled. The indicator can
be logged into from a telnet client
program.
Telnet is Disabled. The indicator
can not be logged into from a
telnet client program.
NOTE: The Telnet: parameter is for advanced users. Refer to the 825
Programmer documentation at “http://tech.825spectrum.com”.
To Next Page
Loading...
