Casio QT-6000 Service Manual

— 35 —
[ 7 ] CF-CARD WRITE/READ test
[Function]
This test will check the write/read test (connection test) for CF-CARD.
Perform the CF-CARD clear test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 0 1 3 ST
p : designates PCMCIA SLOT
0 = CF
1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press "ESC" key)
[LCD]
NG and the address are displayed if WRITE cannot be done
normally.
[PRINT]
CF-CARD pn013
CF WR OK
END pn013
CF pn013
CF WR OK
END pn013
NG and the address are printed if WRITE cannot be done
normally.
[ 8 ] CF-CARD READ ONLY test
[Function]
This test will check the read only test for CF-CARD.
Perform the CF-CARD write test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : p n 1 1 3 ST
p: designates PCMCIA SLOT
0 = CF
1 = PCMCIA
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press "ESC" key)
[LCD]
NG and the address are displayed if READ cannot be done
normally.
NG and the address are printed if WRITE cannot be done
normally.
CF-CARD pn113
CF RD OK
END pn113
CF-CARD pn113
CF RD OK
END pn113
[PRINT]

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g