Casio QT-6000 Service Manual

— 87 —
9-4. OS Fatal Error
When a fatal error occurs during an operation of the operating system, normal operation becomes
impossible afterwards.
Therefore, the OS displays a message as shown below and stops the operation of ECR.
Such errors include errors of the OS (ITRON) itself, driver system errors, etc.
The values of Error No. and Error Code vary according to errors.
* These are intentional system halting errors to prevent a system runaway due to software. Types of errors
may be increased in the future.
OS Fatal Error !!
Error No.1
Error Code -13
1 Error No.:
Indicates the type of the error.
A different number is allocated to each of the main causes, allowing you to identify the source.
2 Error Code:
Indicates details of the error that occurred, the source device, etc.
Some codes may not have any meaning depending on the error type.
3 Error No./Error Code Correspondence Table
Error No. Error Code Description of Error Source of Error
-1 Error code returned by ITRON Semaphore acquisition error Network entry system (Net driver)
-2 Error code returned by ITRON Mailbox creation error TP thread (Net driver)
-3 Error code returned by ITRON Mailbox creation error TP thread (Net driver)
-4 Error code returned by ITRON Semaphore acquisition error TP thread (Net driver)
-5 Error code returned by ITRON Mailbox creation error TP thread (Net driver)
-6 Error code returned by ITRON Semaphore acquisition error TP thread (Net driver)
-7 Error code returned by ITRON Mailbox creation error TP thread (Net driver)
-8 Error code returned by ITRON System error when returning unused TP thread (Net driver)
memory (memory pool) area
-9 Error code returned by ITRON System error when returning unused CGS system (Net driver)
memory (memory pool) area
-10 Error code returned by ITRON System error when returning unused CGS system (Net driver)
memory (memory pool) area
-11 Error code returned by ITRON System error when returning unused CGS system (Net driver)
memory (memory pool) area
-12 Error code returned by ITRON System error when returning unused CGS system (Net driver)
memory (memory pool) area
-13 Error code returned by ITRON System error when returning unused CGS system (Net driver)
memory (memory pool) area
-20 Error code returned by ITRON Mailbox send error Network thread (Net driver)
-21 Error code returned by ITRON Mailbox creation error Network system (Net driver)

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g