Casio QT-6000 Service Manual

— 47 —
[ 24 ] Buzzer test
[Function]
This test will check the buzzer function.
Ring the one-shot buzzer.
[Operation]
Operation : n 0 9 2 ST
n: 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press "ESC" key)
[LCD]
[PRINT]
BUZZ n092
END n092
BUZZ n092
END n092
[ 25 ] OBR test
[Function]
This is a scanner test. The test enters the wait mode for the scanner input, and waits only for scanner.
The test determines the result between OK and NG by comparing the fixed data and the read data.
Make sure to connect OBR (HHS-15) to COM 2.
* The fixed barcode is as follows.
[Operation]
Operation : 9 5 ST
To stop the test, press "ESC" key.
[LCD] [PRINT]
OBR 95
OBR OK
OBR ERR xxxxxxxxxxxxxx
END 95
OBR 95
OBR OK
OBR ERR xxxxxxxxxxxxxx
END 95

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g