Casio QT-6000 Service Manual

— 5 —
2. INITIALIZATION
2-1. MACHINE INITIALIZATION
2-1-1. How to initialize the terminal
Preparation:
1. All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
3. Connect all terminals by inline.
Operation:
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal with pressing the initialze switch and release.
Init Sw
INIT
Copyright(C)2004
CASIO COMPUTER CO.,LTD. C
All rights reserved.
ROM VER xxxxxx xxxx
789
CREATE xxxx-xx-xx xx:xx
QT-6000 Version x.xx 456
APL VER. xxxxxx xxxx
123
0
OK
6. After releasing the key, enter “20000” (U.S.), “10000” (other area: English), “40000” (other area:
German), “50000” (other area: French), “60000” (other area: Spanish) and press the OK key.
ID & IP ADDRESS
Terminal ID ENTER ID
DHCP USE
OK?
——— Terminal ID: 1 - 32
——— If you do not use DHCP server, select “NO”, and you have
to enter IP address of this terminal.
——— Press <YES> to continue.
* The terminal ID of the DHCP server must be “1”.
* The IP address of each terminal should be the unique number from 192.168. 0. 0 to 192.168.255.255.

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g