Casio QT-6000 Service Manual

— 48 —
[ 26 ] MCR test
[Function]
This is a card reader (MCR) test. The test enters the wait mode for only MCR input.
The test judges the result between OK and NG by the comparison between already set data and
read data.
[Operation]
Operation : 9 6 ST
Press [ESC] key to end the test manually.
[LCD]
MCR1 indicates track 1 while MCR2 indicates track 2 in the display.
* Normally ended (both track 1 and 2)
MCR 96
MCR1 OK
MCR2 OK
END 96
MCR2 ERR **************************
**************
MCR1 ERR **************************
******************************
MCR 96
MCR1 OK
MCR2 OK
END 96
OK when the read data is correct.
* Error example
• The display shows error when the track 1 has an error.
The read data is displayed.
• The track 1 ended normally. Only the track 2 has an error.
Only the data read in the track 2 is displayed.
[PRINT]

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g