SECTION
8
CESSNA
HANDLING, SERVICE, AND
MAINTENANCEMODEL 2088
(675
SHP)
IDENTIFICATION PLATE
All correspondence regarding your airplane should include the SERIAL
NUMBER. The Serial Number, Model Number, Production Certificate
Number (PC) and Type Certificate Number (TC) can be found on the
Identification Plate, located on the forward
doorpost of the lefl crew
door on early serial airplanes or on the lefl side of the
tailcone below
the horizontal stabilizer on later serial airplanes. A Finish and Trim
Plate is located on the forward
doorpost of the lefl crew door of all
airplanes and contains a code describing the interior color scheme and
exterior paint combination of the airplane. The code may be used in
conjunction with an applicable Parts Catalog if finish and trim
information is needed.
CESSNA OWNER ADVISORIES
Cessna Owner Advisories are sent to Cessna Aircrafl owners at no
charge to inform them about mandatory
andlor beneficial aircrafl
service requirements and product improvements:
United States Aircraft Owners
If your aircrafl is registered in the U.S., appropriate Cessna Owner
Advisories will be mailed to you automatically according to the latest
aircrafl registration name and address provided to the FAA.
If you require a duplicate Owner Advisory to be sent to an address
different from the FAA aircrafl registration address, please complete
and return an Owner Advisory Application (otherwise no action is
required on your part).
International Aircraft Owners
To recelve Cessna Owner Advisories, please complete and return
an Owner
Adv~sory
Application.
Receipt of a valid Owner Advisory Application will establish your
Cessna Owner Advisory
service (duplicate Owner Advisory service for
U.S. aircrafl owners) for one year, afler which you will be sent a
renewal notice.
(Continued Next Page)
1
8-4 U.S.
Revision
23
To Next Page
Loading...
