Cessna 208B - Power Plant Limitations

SECTION 2 CESSNA
LIMITATIONS MODEL
2088 (675 SHP)
POWER PLANT LIMITATIONS
Engine Manufacturer:
Pratt
& Whitney Canada Inc.
Engine Model Number:
PT6A-114A
Engine Operating Limits:
Refer to Figure
2-3.
Fuel Grade and Approved Fuel Additives:
Refer to Fuel Limitations.
Oil Grade (Specification):
Oil conforming to Pratt
& Whitney Engine Service Bulletin No. 1001,
and all revisions or supplements thereto, must
be used. Refer to
Section 8 for a listing of approved oils. When adding oil, service the
engine with the type and brand which is currently being used in the
engine.
CAUTION
DO NOT
MIX TYPES OR BRANDS OF OIL.
1 PROPELLER:
Hartzell Propeller Manufacturer: Hartzell Propeller Products.
Hartzell Propeller Model Number:
HC-B3MN-3lM10083.
Hartzell Diameter:Maximum: 100 lnches.
Minimum: 100 lnches (No cutoff approved).
Hartzell Propeller Blade Angle at 42-Inch Station:
Feathered: 78.4".
Low Pitch:
9".
Maximum Reverse: -18".
I McCauley Propeller manufacturer: McCauley Propeller Systems.
McCauley Propeller Model Number:
3GFR34C7031106GA-0.
McCauley Propeller Diameter: Maximum: 106 inches.
Minimum: 104 lnches.
McCauley Propeller Blade Angle at 30-Inch Station:
Feathered: 88".
Low Pitch: 15.6".
Maximum Reverse: -14".
(Continued Next Page)
FAA APPROVED
Revision 23