CESSNA SECTION 8
MODEL
2088 (675 SHP)HANDLING SERVICE, AND MAINTENANCE
AIRPLANE INSPECTION PERIODS
(Continued)
CESCOM SYSTEM
CESCOM is Cessna's Computerized Maintenance Records System.
This comprehensive system provides you with an accurate and simple
method of monitoring and scheduling inspections, Service Bulletins,
Service Kits, Airworthiness Directives as well as scheduled and
unscheduled maintenance activities. For detail information about
CESCOM, refer to the CESCOM Instruction Manual supplied with your
airplane.
ENGINE CONDITION TREND MONITORING
Pratt
&
Whitney Canada Inc. Engine Condition Trend Monitoring is a
system of recording engine instrument readings, correcting the
readings for ambient conditions, and comparing actual engine
operation to typical engine operating characteristics.
It has been established that engine operating characteristics, such as
output torque (Tq), propeller RPM (Np), interturbine temperature
(ITT),
gas generator RPM (Ng)! and fuel flow (Wf) are predictable for various
engine types under
speclfic ambient conditions.
Because aircraft engines operate at a wide range of altitudes, outside
air temperatures, and airspeeds, corrections for varying ambient
conditions are also incorporated into the Trend Monitoring process.
Additional information about both of these methods may be obtained
from the following sources:
A Caravan Service Station.
Cessna Propeller Aircraft Product Support.
Pratt
&
Whitney Canada, Inc.
.,
1000 Marie -Victorin, Longueuil, Quebec
Canada, J4G
1Al
:,
Attention: Customer Support, Small Turboprops
=)
Mail Code: 1 RC1
Tel: (514) 677-9411
~,
The publication "Engine Condition Trend Monitoring and Power
Management for
PT6A-114, PT6A-114A Installed in the Cessna
?,
Caravan I" supplied in this Pilot's Operating Handbook, or from
=,
sources listed above.
.
Pratt
&
Whitney Canada Aircraft Gas Turbine Operation
.,
Information Letter, No. 23.
(Continued Next Page)
1
Revision 23
U.S.
8-9
To Next Page
Loading...
