10 Using the Rapid
Sample Introduction
System
The ASXPRESS PLUS Rapid Sample Introduction System is both reliable and easy
to use. Before using it, however, ensure that your lab environment provides
operating conditions that will prolong the life of the ASX
PRESS PLUS system.
Once the proper operating conditions are met, you can operate the rapid
sample introduction system. When you finish using the ASX
PRESS PLUS system, it
may be necessary to flush the rinse station and flow path before shutting the
system down.
This chapter explains how to create the proper operating conditions for using
the ASX
PRESS PLUS Rapid Sample Introduction System. It also explains how to
start and shut down the system, and how to flush the rinse station and flow
path.
Establishing Optimal Operating Conditions
The ASXPRESS PLUS Rapid Sample Introduction System operates reliably under
virtually the same operating conditions described in the autosampler
Operator’s Manual. However, it is not indestructible. Malfunction or damage
can occur if specific operating conditions are not met. Meeting these
conditions requires that you create the proper lab environment, replace
ASX
PRESS PLUS Rapid Sample Introduction System components that wear out
under normal use, and purchase the appropriate supplies. The following
sections explain how to meet these conditions.
To Next Page
Loading...
