2 Preparing for
Installation
Installing the ASXPRESS PLUS system requires preparation. Before you install the
ASX
PRESS PLUS Rapid Sample Introduction System, you should evaluate the
physical arrangement of the laboratory to choose a suitable location which
allows placement of the ASX
PRESS PLUS valve/pump module as close to the
nebulizer as possible. Once you choose a location, you must carefully unpack
the system prior to beginning the installation.
This chapter discusses what requirements must be met when you choose a
location for the ASX
PRESS PLUS Rapid Sample Introduction System. It also
describes how to unpack the system before installation.
Choosing a Location
Choosing a location for the system involves evaluating the lab environment for
the availability of space, liquid waste routing and power. For the system to
function optimally, the location you select must meet specific requirements
associated with each of these items. The following sections discuss space,
water, and power requirements.
To Next Page
Loading...
