CETAC ASXPRESS PLUS - 5 Preparing an ASX-1400;1600 Autosampler

53
5 Preparing an
ASX-1400/1600
Autosampler
To work properly with the ASXPRESS PLUS system, an ASX-1400 or ASX-1600
autosampler will require:
 Adequate sample and rinse flow rate
 Xpress rinse station
 Modified rinse tubing arrangement
 Xpress stirrer/probe block
 1.0mm ID sample probe
The ASX-1400/1600 autosampler firmware does not need to be upgraded to
work with the ASX
PRESS PLUS Rapid Sample Introduction System.