ASXPRESS PLUS Rapid Sample Introduction System Operator’s Manual
Chapter 8: Installing the Software
92
Figure 8-8 Configuration Tool Software Window (before connecting)
Running the Xpress Configuration Tool for the First
Time
Inspecting the ASXPRESS PLUS System Components
It is important to verify that all system components are in good working order
and are undamaged prior to operation of the ASX
PRESS PLUS system. It is
unlikely that the liquid carrying components will be damaged during shipping.
However, as part of standard operation procedure, you should regularly
inspect all components for damage prior to operating the rapid sample
introduction system.
To Next Page
Loading...
