11 Maintaining the
ASX
PRESS PLUS Rapid
Sample Introduction
System
Routine maintenance of the ASXPRESS PLUS Rapid Sample Introduction System
consists of daily and weekly cleaning of specific components. Routine
maintenance also includes checking ASX
PRESS PLUS components for leaks or
other damage. Additional periodic maintenance tasks may be required,
including replacement of the following components: peristaltic pump tubing,
rinse tubing, and sample probe.
This chapter explains how to clean the ASX
PRESS PLUS Rapid Sample
Introduction System, inspect it for leaks, and replace damaged components.
Discharge static buildup and ground to the ASXPRESS PLUS Rapid Sample
Introduction System base or cabinet before performing any maintenance.
Do not touch or short-circuit bare contacts, COM, USB, or auxiliary ports.
WARNING
To Next Page
Loading...
