ASXPRESS PLUS Rapid Sample Introduction System Operator’s Manual
Chapter 15: Glossary
Sample Loop: The loop of tubing, of predetermined length/volume, which
holds the precise sample volume specific to the users unique analytical system
requirements.
Sample Probe: The tube that moves the analyte from the sample vial to the
sample transfer tubing.
Rabbit Board: The Rabbit-branded microcontroller board inside the
electronics module.
Rinse Station: The autosampler component used to clean the sample probe
with a rinse solution.
Six-Port Valve: The valve which provides the switching action between “Load
Sample” and “Inject/Rinse” modes of the ASX
PRESS PLUS Rapid Sample
Introduction System.
UHMW-PE: Ultra-High Molecular Weight PolyEthylene.
Vacuum Pump: The pump by which the sample is drawn into the sample loop,
and by which rinse solution is passed through the sample loop and associated
tubing.
VDC: Volts Direct Current.
To Next Page
Loading...
