Chadwick-Helmuth 8500C - Setting Pickup Pulse Rate Units; Setting the Output Storage Device; Setting the Time and Date

9-6
Chadwick-Helmuth Company, Inc.
Chapter 9
- Status Screen Operation
9.4.1 Setting the Time and Date
Time and date may be changed by using t he Arrowkeys to move the cursor to the appropriate Status
Setup screen data field. The current time is displayed in a 24-hr format. The hours, minutes, day of th
month, or year may be changed with the numeric keys. The day of the week and the month may be
selected with the
<CHANGE>
soft key. The seconds may not be modified and are automatically set to
zero whenever the time or date is changed.
9.4.2 Setting Pickup Pulse Rate Units
Frequency units for the pickup pulse rate may be displayed in either RPM or Hertz by moving th
cursor to the
P/U Rate
data field and pressing the
<CHANGE>
soft key.
9.4.3 Setting the Output Storage Device
The output storage device for subsequent
STORE
operations may be set by moving the cursor to th
Store To
data field and pressing
<CHANGE>
.