Booting Up the 8500C/C+
Mode l8500C/8500C+ Operators Manual
4-13
4.5.2 Restarting the 8500C/C+
In the event of an instrument malfunction or lock-up, a manual reset can be performed by temporarily
removing power to the 8500C/C+. This action resets the machine without clearing the memory.
If this procedure fails, you must clear the memory by doing a cold start (hard reboot). To do this
procedure, remove the power, hold down th
START
key, and reconnect the power. Wait
approximately 5se c before releasing the
START
key.
NOTE: Disconnecting the power supply while the 8500C/C+ is in status mode may disrupt
the time-of-day clock’s normal functioning.
To Next Page
Loading...