Check Point UTM-1 Edge - Using the Internet Wizard

Using the Internet Wizard
98 Check Point UTM-1 Edge User Guide
You can configure your Internet connection using any of the following setup tools:
• Setup Wizard. Guides you through the UTM-1 appliance setup step by step. The
first part of the Setup Wizard is the Internet Wizard. For further information on
the Setup Wizard, see Setting Up the UTM-1 Appliance on page
83.
• Internet Wizard. Guides you through the Internet connection configuration
process step by step. For further information, see Using the Internet Wizard on
page
98.
• Internet Setup. Offers the following advanced setup options:
• Configure two Internet connections.
For information, see Configuring a Backup Internet Connection on page
155.
• Enable Traffic Shaper for traffic flowing through the connection.
For information on Traffic Shaper, see Using Traffic Shaper.
• Configure a dialup Internet connection.
Before configuring the connection, you must first set up the modem. For
information, see Setting Up Modems on page
145.
Using the Internet Wizard
The Internet Wizard allows you to configure your UTM-1 appliance for Internet
connection quickly and easily through its user-friendly interface.
Note: The first time you log on to the UTM-1 Portal, the Internet Wizard starts
automatically as part of the Setup Wizard. In this case, you should skip to step 3 in
the following procedure.