Check Point UTM-1 Edge - Setting Your Security Policy

Viewing the Routing Table
Chapter 12: Setting Your Security Policy 325
Chapter 12
This chapter describes how to set up your UTM-1 appliance security policy.
You can enhance your security policy by subscribing to services such as Web Filtering and
Email Filtering. You can also integrate all UTM-1 appliances into an overall enterprise
security policy by connecting to SMART management.
Note: When the firewall is managed by SmartCenter, the SmartCenter security
policy replaces the default security policy and the firewall security levels. The
firewall security level is set to High and cannot be changed.
Note: Local security rules take precedence over rules configured by the central
management.
For information on subscribing to services and SMART Management, see SMART
Management and Subscription Services on page
445.
Setting Your Security Policy