Adding Internet Connections to Bridges
Chapter 7: Using Bridges 237
Adding Internet Connections to Bridges
To add an Internet connection to a bridge
1. Click Network in the main menu, and click the Internet tab.
The Internet page appears.
2. Next to the desired Internet connection, click Edit.
The Internet Setup page appears.
3. In the Port drop-down list, specify the port that the Internet connection should
use, by doing one of the following:
• To use the ADSL port, select ADSL.
This option is available in ADSL models only.
• To use the WAN port, select WAN.
This option is available in non-ADSL models only.
• To use the DMZ/WAN2 port, select WAN2.
4. Do one of the following:
• To configure a Bridged PPPoA connection, in the Connection Type field, select
PPPoA.
This option is available in ADSL models only.
• Otherwise, in the Connection Type field, select Bridged.
To Next Page
Loading...
