Check Point UTM-1 Edge - Updating the Firmware

Updating the Firmware
580 Check Point UTM-1 Edge User Guide
Updating the Firmware
If you are subscribed to Software Updates, firmware updates are performed automatically.
These updates include new product features and protection against new security threats.
Check with your reseller for the availability of Software Updates and other services. For
information on subscribing to services, see Connecting to a Service Center on page
446.
When connected to SmartCenter, you can also update UTM-1 firmware using
SmartCenter's SmartUpdate.component. For information refer to the Check Point
SmartUpdate documentation.
If you are not subscribed to the Software Updates service, you must update your firmware
manually.
To update your UTM-1 firmware manually
1. Click Setup in the main menu, and click the Firmware tab.
The Firmware page appears.
2. Click Firmware Update.