Cascading Your Appliance
82 Check Point UTM-1 Edge User Guide
5. Thread the anti-theft device's pin through the bolt’s holes, and insert the pin
into the main body of the anti-theft device, as described in the documentation
that came with your device.
Cascading Your Appliance
The UTM-1 appliance protects all computers and network devices that are connected to its
LAN and DMZ ports. If desired, you can increase the appliance's port capacity by cascading
hubs or switches.
To cascade the UTM-1 appliance to a hub or switch
1. Connect a standard Ethernet cable to one of the appliance's LAN ports or to its
DMZ/WAN2 port.
The UTM-1 appliance automatically detects cable types, so you can use either a
straight-through or crossed Ethernet cable.
2. Connect the other end of the cable to an Ethernet hub or switch.
3. Connect additional computers and network devices to the hub or switch as
desired.
To Next Page
Loading...
