Deleting Bridges
242 Check Point UTM-1 Edge User Guide
Deleting Bridges
To delete a bridge
1. Remove all internal networks from the bridge, by doing the following for each
network:
a. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
b. Click Edit in the desired network's row.
c. In the Mode drop-down list, select Enabled.
d. Click Apply.
2. Remove all Internet connections from the bridge, by doing the following for
each connection:
a. Click Network in the main menu, and click the Internet tab.
The Internet page appears.
b. Next to the desired Internet connection, click Edit.
c. The Internet Setup page appears.
d. In the Connection Type field, select the desired connection type (not
Bridged).
e. Click Apply.
3. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
4. In the desired bridge’s row, click the Erase
icon.
A confirmation message appears.
5. Click OK.
The bridge is deleted.
To Next Page
Loading...
