Uninstalling a Certificate
536 Check Point UTM-1 Edge User Guide
Uninstalling a Certificate
If you uninstall the certificate, no certificate will exist on the UTM-1 appliance, and you
will not be able to connect to the VPN if a certificate is required.
You cannot uninstall the certificate if there is a VPN site currently defined to use
certificate authentication.
Note: If you want to replace a currently-installed certificate, there is no need to
uninstall the certificate first. When you install the new certificate, the old certificate
will be overwritten.
To uninstall a certificate
1. Click VPN in the main menu, and click the Certificate tab.
The Certificate page appears with the name of the currently installed certificate.
2. Click Uninstall.
A confirmation message appears.
3. Click OK.
The certificate is uninstalled.
A success message appears.
4. Click OK.
To Next Page
Loading...
