Check Point UTM-1 Edge - Logging off a Remote Access VPN Site

Logging off a Remote Access VPN Site
Chapter 16: Working with VPNs 527
• The VPN Login Status box appears. The Status field tracks the connection’s
progress.
• Once the UTM-1 appliance has finished connecting, the Status field changes
to “Connected”.
• The VPN Login Status box remains open until you manually log off of the
VPN site.
Logging off a Remote Access VPN Site
You need to manually log off a VPN site, if it is a Remote Access VPN site configured for
Manual Login.
To log off a VPN site
• In the VPN Login Status box, click Logout.
All open tunnels from the UTM-1 appliance to the VPN site are closed, and the VPN
Login Status box closes.
Note: Closing the browser or dismissing the VPN Login Status box will also terminate
the VPN session within a short time.