Check Point UTM-1 Edge - Backing up the UTM-1 Appliance Configuration

Backing Up the UTM-1 Appliance Configuration
620 Check Point UTM-1 Edge User Guide
EXAMPLE 1
The following filter string captures all UDP packets:
udp
EXAMPLE 2
The following filter string captures all UDP packets destined for port 80:
udp dst port 80
Backing Up the UTM-1 Appliance Configuration
You can export the UTM-1 appliance configuration to a *.cfg file, and use this file to
backup and restore UTM-1 appliance settings, as needed. The file includes all your
settings.
The configuration file is saved as a textual CLI script. If desired, you can edit the file. For
a full explanation of the CLI script format and the supported CLI commands, see the
Embedded NGX CLI Reference Guide.
Exporting the UTM-1 Appliance Configuration
Exporting the UTM-1 Appliance Configuration to Your Computer
To export the UTM-1 appliance configuration to your computer
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Export.
A standard File Download dialog box appears.
3. Click Save.