Upgrading Your License
582 Check Point UTM-1 Edge User Guide
Upgrading Your License
You can upgrade the UTM-1 product installed on your appliance, by purchasing a new
license. You will receive a new Product Key that enables you to use advanced features on
the same UTM-1 appliance you have today. There is no need to replace your hardware.
You can also purchase node upgrades, as needed.
For example, if you have UTM-1 Edge X16 and you need secure Internet access for more
than 16 computers, you can upgrade to UTM-1 Edge X32 without changing your
hardware.
Note: You can only upgrade within the same appliance hardware type.
Note: To purchase an upgrade, contact your UTM-1 appliance provider.
Alternatively, you can click Upgrades & Services in the Welcome page to view and
purchase available upgrades.
To upgrade your product, you must install the new Product Key.
To install a Product Key
1. Click Setup in the main menu, and click the Firmware tab.
The Firmware page appears.
2. Click Upgrade Product.
To Next Page
Loading...
